Installation of a Subwoofer in a Car the right way
Life is not complete without music; it does not matter if you are relaxing on your couch, or doing some work with some background music, whether driving or stuck in the traffic mess, music is important in life. It is a good thing that you have music in your car however it is now time to improve it with updated subwoofers for that out of the world experience. Install these subwoofers after you have looked at these subwoofers available and selected one according to your needs and budget. You can go ahead and contract someone to do it for you, but you can also do it with these six simple steps.
You need some take, the amplifier, the amplifier kit, a subwoofer box, and these subwoofers. Start by ensuring that these subwoofers box is designed specifically for the speakers and the that amp you have selected is compatible with the speakers. Now get the power line ready, by getting beneath the dash and finding an opening through the firewall where the power wire can pass. For most kits, the thickness of the power wire should be between 8 to 0. It is time to get a fuse near the connector that will go right in the battery and get one close the battery but do not connect it for now.
Now pull out the dash and the player head unit and using the tape, attach the remote wire with the RCA cable and adjoin it below the dash on the right side of the passenger to the player position. Now you can decide to connect the remote wire and the straight wire or the wiring harness to the wire corresponding from the player and now connect the RCA cables. At this point the wires have to be run back to the point where the mounting of the amp was done. Run the wires to the position where the amp will be placed. It is suggested that for safety the wires should be run on the passenger side down.
The carpet on the amp should now be lifted and get a good place where the metal of your car body is exposed so that you can lay the wire. You may have to add some paint to get a strong position in case you don’t get a good position. Lastly, these subwoofers can be placed in the car, connect the amp to the speaker wire. In the battery cable, secure the fuse with an item in the engine compartment such as twisting it to the hoses, or hook up the cable of the battery to the plus side of the battery. Prior to reassembling, test these subwoofers and ensure everything is properly connected and if all is in order reassemble the dash and enjoy the fine tunes in your car.