With the advancement in ways of operations, it has been possible to come up with various tools and equipment used in various sectors. The education that people have acquired in addition to the many research activities carried out have facilitated successful activities carried out. The ultraviolet germicide lamps have been developed to help in the disinfection of the various pathogens and germs that occur from most of the reactions. It is easy for the various small microorganisms to be developed especially with the room temperature and availability of other necessities. The best way of removing those pathogens especially in lab areas is through the use of the ultraviolet rays since it ensures destruction of the organisms.
The scientists need to find out some of the reactions which might be helpful in determining the intended results in some areas and the use of the germicide lamps with ultraviolet rays act better. However, it is evident that ultraviolet rays are very much dangerous to direct contact with the body since they have strong radiation and is essential to consider some of the following tips when using the lamps. The use of the germicide lamps is very much different from the rest of the lamps and there are manufacturer’s instructions to be followed. There are some regulations on when and how to use the germicide lamps and one has to go by them less they will be affected.
The face of the individual has to be covered fully by the masks which prevent the face from direct ultraviolet rays and one has to abide by it since the rays are all over the place. The sightseeing organs which are the eyes have to in full protection since they are the ones being used to look and confirm the location. Looking at the ultraviolet rays from the germicide lamps directly can damage the eyes completely. The strength and intensity of the ultraviolet rays is very strong and viewing it directly even for few seconds can lead to damage.
The germicide lamps should be turned on with the ultraviolet rays from the source when the activities at the lab site have been successfully completed. This is to avoid the ultraviolet rays which might remain in the atmosphere and can then come into direct contact with the body and even be inhaled hence has to be turned on only after working at the site.The ultraviolet rays have to be effective in the area designed for when no one is still working or is accessing the place to avoid the direct contacts. With the hands and the rest of the body, protective gloves and recommended lab coats should be worn since the sites with the rays can be touched. Working involves movements and one can come in contact with the sites having contaminated items which is essential to protect hands.